(1) Each pattern in the pattern is overlapping and should be arranged from deep to shallow.
(2) The patterns in the pattern are separated from each other, regular or irregular, and are generally arranged in close proximity to the flowers.
(3) For the patterns that require high flowers, the circular nets should be arranged as close as possible, except for the reasonable borrowing of the lines.
(4) The circular net with a large flower area is placed as far as possible behind.
(5) Fine points, thin stems, etc. are generally considered to be in front.
(6) Anti-printing printing process, the anti-printing paste is arranged in the front, and the anti-printing paste is arranged in the back.
(7) Special printing such as gold and silver powder printing, overprint printing and printing, etc., generally gold and silver powder paste and hood printing paste are at the end. In order to strengthen the complex circle control before the net making, it is best to put a circle in the middle of the net and use it after baking for lh at 180 degrees Celsius. Do not mix domestic nets with imported nets. Try to use the same manufacturer and the same batch of nets to prevent mistakes.
(8) When selecting the stencil, the surface of the stencil is required to be smooth and clean, without streaks, no black spots, no creases, no burrs in the net, uniform mesh requirements, and the opening ratio conforms to the standard. The inherent texture of the slab is too brittle and too tough to cause trouble in printing.